Click on the image to check the artwork
1 Product Introduction
In order to obtain reproducible results from physical, appearance and chemical performance testing of surface coatings, it is essential to prepare uniform films of controlled thicknesses.
This can be difficult to achieve with hand application methods which often result in variations between operators, and for this reason automatic application methods are recommended.
Our automatic instruments have been designed to produce consistent results when used with a wide range of different applicators e.g. Block Spreaders, Wire Wound Bars, Bird Type Applicators, Sag Index Applicators, Sagging and Leveling Testers and many others in order to provide the benefits of reproducibility and control of application.
These instruments have a unique drive system that has been designed to run smoothly with all types of coating material at all film thicknesses to eliminate the “banding“that can occur with thin film coatings such as inks and transparent coatings such as wood stains or automotive clear coats.
2 Specification
2.1 Big LED design, touch screen operation
2.2 Technical Specification
2.2.1 Item Number: BEVS1811/1 (other item BEVS1811/2 and BEVS1811/3 same as)
2.2.2 Maximum Film Length: 360mm
2.2.3 Speed: 20mm/s-200mm/s (Adjustable)
2.2.4 Speed Precision: 1mm/s
2.2.5 Stroke Length is Adjustable
2.2.6 Intended use
Paint,coating, printing materials etc.
Automatic Film Applicator